The DWV9315 Replacement Hose for DEWALT Dust Extractors is a crush proof replacement 15′ hose for DWV012 Dust Extractor and includes a universal connector for fast connections to power tools. The DWV9315 Replacement Hose for DEWALT Dust Extractors is a crush proof replacement 15′ hose for DWV012 Dust Extractor and includes a universal connector for fast connections to power tools. Hoses assist collection systems in capturing and collecting such dust for safe disposal. For example, static dissipative hoses, a type of anti-static hose, reduce or eliminate the risk of static electricity. Most portable dust extractors use a hose roughly 1-1/2″ in diameter.
A dust extractor, also known as a dust collector, is a device that helps to collect dust and other particles from the air in a given area. Dust extractors come in many different types and sizes, but they all work by using a fan to suck in air and then trapping the dust particles in a filter. 38mm Hose is most often used to connect power tools, mitre saws and smaller bench top machinery to an extractor. When using it with a bag type high volume extractor, always try to keep the length of 38mm hose to a minimum. The extractors perform better with a larger diameter hose whenever possible.
We have a standardized duct that will fit a 1.5″ hose on the outside of the duct. The inside of the duct is 1.375″ so a 1.25″ hose will fit on the inside of the duct. The main types of dust-collecting processes are inertial separators, fabric filters, wet scrubbers, electrostatic precipitators, and unit collectors. This not only separates the chip collection from the air filtration, but it makes them a lot easier to keep clean than having to empty and clean a cloth bag. This type of collector works well with up to 15 feet of hose, but is still too small to serve a duct system connected to more than one tool at a time.
