Home
Shop

Controller Modbus TCP

Transmission performance: Class D per EN 50173
Program memory: 4 MB
Data memory: 4 MB
Non-volatile software memory: 32Kbytes
Number of modules per node (max.): 250
Number of modules without a bus extension (max.): 64
Input and output process image (fieldbus) max.: 1020 words/1020 words
Input current (typ.) at nominal load (24 V): 500mA
Power supply efficiency (typ.) at nominal load (24 V): 90%
Current consumption (5 V system supply): 390mA
Total current (system supply): 1,700mA
Supply voltage (actuator): N/A N/A
Supply voltage (field): 24 VDC (-25 … +30 %); via power jumper contacts
Current carrying capacity (power jumper contacts): 10A
Number of outgoing power jumper contacts: 3
Isolation: 500 V system/field

LC Code: LC11009

Availability: In Stock
Get A Free Quote





    The Modbus TCP Controller can be used as a programmable controller within ETHERNET networks in conjunction with the WAGO I/O System. The controller detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules.

    Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs. Both interfaces support autonegotiation and Auto-MDI(X). The DIP switch configures the last byte of the IP address and may be used for IP address assignment.

    The controller is designed for fieldbus communication in Modbus® networks. It also supports a wide variety of standard ETHERNET protocols (e.g., HTTP(S), BootP, DHCP, DNS, SNTP, (S)FTP, SNMP). An integrated Webserver provides user configuration options, while displaying the controller’s status information. The IEC 61131-3 programmable controller is multitasking-capable and features a capacitor-backed RTC.

    Back to Top


      Call Now

      Product has been added to your cart