Current Signal Conditioner

Input signal type: Current
Input signal (current): AC 0.5 … 100 A DC ±100 A
Frequency range: 15 … 1000 Hz
Input current (max.): 100 A AC/DC
Response threshold: 500 mA (AC); 250 mA (DC)
Resolution (current): 10 mA 10 mA
Output signal type: Current Voltage
Output signal (voltage): ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V; 2 … 10 V
Output signal (current): ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
Load impedance (voltage output): ≥ 1 kΩ
Load impedance (current output): ≤ 600 Ω
Power supply type: 24 VDC
Nominal supply voltage US: DC 24 V
Supply voltage range: ±30 %
Current consumption at nominal supply voltage: ≤ 50 mA (+ IDO)

LC Code: LC11005

Availability: In Stock

Categories:Controller

Brands:Wago

WAGO’s current signal conditioner measures AC/DC currents up to 100 A, while converting the measured current into an analog standard signal at the output.
Features:

Both digital signal output and relay with changeover contact react to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values).
Clipping capability for analog signal limitation to output end values
Adjustable software filter
Input/output response simulation via configuration display
Safe 3-way isolation with 3 kV test voltage per EN 61010-1