Connectors are parts or devices used for electrically connecting or disconnecting circuits etc. They can connect and disconnect by hand or with simple tools without requiring special tools or processes such as soldering. This type of connector is also known as a plug. A male connector can be recognized by the fact that, when it is disconnected or removed, the unshielded electrical prongs are plainly visible. The most common male connector is a two- or three-prong plug attached to the end of the cord for an electrical appliance.
Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors. A male connector is a type of connector with one or more uncovered or exposed pieces of conductor which can be inserted into a female connector to ensure a physical connection. A male connector is also called a plug, and it is used for establishing an electrical or data connection between two devices.
Some of the basic features for a good connector are reliability and low cost, high return and low insertion losses, easy to operate and install and low sensitivity for environmental conditions. A connector is a device that joins two pieces of equipment, wire, or piping together. Connectors are parts or devices used for electrically connecting or disconnecting circuits etc. They can connect and disconnect by hands or with simple tools without requiring special tools or processes such as soldering.