The Mitsubishi QY80 24V DC Output module is designed for the Q series PLC. It provides a potential isolated Output for digital process signals. LED indication of Output status, models with 16 points have removable terminal blocks with screws and models with 32/64 points are connected by a D-Sub or 40-pin plug. Assembled cables are available for modules with D-Sub plugs. The QY80 24 V DC Output module is a basic PNP-type analogue Output module. The heart of the module is an integrated 16-point potentiometer/position transducer that converts analogue 0…10 V signal into digital 24 V DC (output). An LED display indicates the status of each Output point. Output modules with 16 points have removable terminal blocks with screws, while those with 32/64 points connect via a D-Sub or 40-pin plug. Assembled cables available for modules with D-Sub plugs.
Ultra high speed processing, production time is shortened, better performance. As applications become larger and more complex, it is necessary to shorten the system operation cycle time. The operation period can be shortened by the super high basic operation speed 1.9ns. In addition to achieve in the past with the control of single-chip high-speed control, The system performance can be improved by reducing the total scan time, To prevent any possible performance bias.
Convenient processing of large capacity data. In the past can not achieve the standard RAM and SRAM card file register area of continuous access, The boundary of each area should be considered in programming. The SRAM 8MB extension card is installed in the high speed universal QCPU, Standard RAM can be used as a continuous file register, Capacity up to 4736K words, thus simplifying the programming.
